Digital Nano-Ammeter
Digital Nano-Ammeter is a very low current measuring Instrument with 4-channels. Its lower range is from 1 nA to 250 nA with a resolution of 0.1 nA. It can be used where extremely low current measurements are required. Some of the uses of this product are: Ion Beam current measurement, Leakage current/ High resistance measurement, Chemical electrolysis etc.
SALIENT SPECIFICATIONS
| Range (Unipolar) | 1 nA to 250 nA, 250 nA to 25 µA (Auto selected) |
| Resolution | 0.1 nA (lower range), 6 nA (higher range) |
| Accuracy | 1% FS |
| Polarity of input | Positive only |
| Display | 4-line LCD panel |
| Serial Interface | RS232 |
| Input connection | Co-axial BNC |
| Protection | Withstands accidental connection with 4V voltage source or 40 mA input current for 5 sec and -ve current upto 5 mA for 10 sec. |
| Power Supply | 230 V AC |
Digital Nano-Ammeter is a very low current measuring Instrument with 4-channels. Its lower range is from 1 nA to 250 nA with a resolution of 0.1 nA. It can be used where extremely low current measurements are required.
Some of the uses of this product are: Ion Beam current measurement, Leakage current/ High resistance measurement, Chemical electrolysis etc.
Digital Nano-Ammeter DNM-4125 is a multi-range, multi-channel low current measuring instrument. This instrument has 32 bit ARM-7 based µ-controller based design. It measures electric current from 1 nA to 25 µA. It has four channels which are scanned at very high speed. Input current values are displayed on the local LCD as well as available through serial interface. Each channel of the instrument cater two ranges of operation. The lower range is from 1nA to 250 nA with a resolution of 0.1nA whereas higher range is from 250 nA to 25µA having resolution of 6 nA. These ranges are auto selectable for individual channel. There are provisions of additional command driven features through serial interface.
The following block diagram shows the basic working principle of this nano-ammeter.
SALIENT SPECIFICATIONS
| Range (Unipolar) | 1 nA to 250 nA, 250 nA to 25 µA (Auto selected) |
| Resolution | 0.1 nA (lower range), 6 nA (higher range) |
| Accuracy | 1% FS |
| Polarity of input | Positive only |
| Display | 4-line LCD panel |
| Serial Interface | RS232 |
| Input connection | Co-axial BNC |
| Protection | Withstands accidental connection with 4V voltage source or 40 mA input current for 5 sec and -ve current upto 5 mA for 10 sec. |
| Power Supply | 230 V AC |
FACILITIES REQUIRED FOR MANUFACTURING
- PCB fabrication (May be out-sourced)
- Soldering station for component assembly
- Assembly of parts in a box
- Wire harnessing
- Standard current source-meter
- Multimeter (Able to measure voltage in order of mV)
- PC (Dual-core or higher configuration) with WIN7 OS
OTHER FIRMWARE REQUIREMENTS
Software
| SR NO. | Organization name | Licensee Name | Licensee Code | ACQUIRED ON | Valid Till | Address | City | State | Phone | |
|---|---|---|---|---|---|---|---|---|---|---|
| 01 | Rectifiers & Electronics Pvt. Ltd. | Gulshan Matta | 407 | 23-06-2022 | - | 10/3 DLF Industrial Area Moti Nagar New Delhi - 110015 | Delhi | Delhi | gmatta@re-india.com | 011-4380100 |
| 02 | M/S. TRIUMPH DESIGN CORPORATION | Mr. KAMAL R. PANCHAL, Mr. HIREN R. PANCHAL | 36 | 10-04-2023 | 10-04-2030 | 208, Shiv Sagar Ind Est., Kotkar Road, Goregon (E) | Mumbai | Maharashtra | kamal@triumphdesign.in | 9820527156 |
| SR NO. | COUNTRY NAME | PATENT NUMBER | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| No Data Found. | |||||||||||||
| SR NO. | NAME | STANDARD NUMBER | LOGO | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| No Data Found. | |||||||||||||
General License Fee : ₹ 11,500.00 (Eleven Thousand Five Hundred)
General Royalty : 0%